Finest French Fry Cutter [2022]

Versatility provides to the worth of most modern-day kitchen units. So, Tiger Chef contains a number of dies and blade assemblies within the authentic buy of this ”[amazon. It comes with stainless steel ½-inch ¼-inch, 3/8-inch fry cutter, and vegetable cutter blades as well as 6 and 8 wedge blade assemblies.

It has a very durable cast iron frame for a long lifespan and the ability to handle even the hardest potatoes. For mounting options, this French fry cutter comes with four detachable suction cup feet, or it can be permanently mounted at a professional restaurant prep station counter.

Lekoch Stainless Steel Mandoline Slicer

• Versatile mandoline with multiple attachments
• Four height settings for stick fries and waffle French fries
• Stainless steel blade with food-grade plastic frame

This is a “Mandoline” which is technically a type of manual food processor designed to help slice vegetables of all kinds with consistency, and speed. This unit by Lekoch is very versatile and has four adjustment settings as well as a variety of attachments. Not only does it cut potatoes into French fries, but it can also help process just about any type of salad fare.

Amongst the accessory features is a waffle fry cutter, as well as settings to make stick-shaped French fries. To make the waffle fries you simply slice a potato to your preferred thickness. Then set up the waffle accessory and pass the slice of potato through. Then turn it 90-degrees and run it through again.

The Nemco Spiral Fry Potato Cutter 55050AN is a heavy-duty “Spiralizer” made from heavy-duty cast aluminum instead of plastic. This means it’s robust enough to handle the A-typical forces involved in making curly fries from fresh russet potatoes. The Nemco spiralizer also comes with a mounting foot with a knob that tightens the bolt.

The rotating push block has spikes that sink firmly into the potato. It’s arguably easier to work with if you simply clean the potato, but don’t peel it. Once it’s firmly set in place you can carefully spin the crank handle, which will screw down while applying continuous pressure as the potato is spiral cut.

How We Picked

Fresh cut French fries are a real treat, and surprisingly easy to pull off at home, in a food truck, or a professional restaurant. Not to mention they can be a real money saver for a family that’s trying to stretch the food budget.

These days a lot of French fry cutters are also engineered to handle other fruits and vegetables. This puts things like zucchini sticks and rutabaga wedges on the menu right next to a plate of steak frites.

Throughout the review process, we tried to look for versatile units. Right off the bat, this included things like additional cutting dies and blade assemblies. These let you make things like quarter-inch shoestring fries, half-inch standard cut, or even wedges and steak fries. We also tried to keep an eye out for units that let you be a little more creative to make things like waffle-cut fries and even a high-quality spiralizer for curly fries.

Durability was also another critical priority in the units we reviewed. There are a lot of plastic French fry cutters that carry little warranty or no warranty coverage at all, that simply breakdown. Sometimes within just the first few uses.

For the most part, we tried to stick to heavy-duty materials like cast iron, stainless steel, or cast aluminum. If a unit had some plastic components, they need to be well-engineered and lived up to food-grade standards.

Safety and mounting features were also something we made sure to keep on the radar. Things like suction cup feet or permanent mounting options are important. When you are working with a firm potato or another type of hard vegetable, the amount of force applied by a lever or crank mechanism might surprise you.

Making sure that the French fry cutter had a reasonable way to stay in place without you having to physically resist the pressure applied by one arm with the other arm was something we were mindful of throughout the process.

New Star Food Service 42313 Commercial Restaurant French Fry Cutter with Suction Feet

Specs:

• Heavy-duty cast-iron frame
• Stainless steel components
• Anchors to counter with four suction feet
• Optional permanent mounting hardware on a wall or countertop
• Cuts potatoes up to 6″ long
• Half-inch French fry blades
• Makes French fries, sweet potato fries, zucchini sticks, and other favorites
• Optional die accessories in 6 and 8 wedges

With its durable cast-iron construction and stainless steel cutting blades, the New Star Food Service 42313 Commercial Restaurant French Fry Cutter was designed to make easy work of even the firmest potatoes. This also means it’s got the wear with all to cut other vegetables like zucchini, rutabagas and of course, sweet potatoes.

This particular package comes setup to cut standard quarter-inch French fries. Though the New Star Food Service does also offer additional die types for times when you might want thicker fries. This includes a 3/8th inch, as well as 6-wedges and 8-wedges.

These larger settings are handy for working with other vegetables like sweet potatoes, zucchini, and rutabaga. Though they are also nice for those times when you might want steak fries or other thick-cut vegetables.

The New Star Food Service 42313 French fry cutter relies on a stout cast iron lever to drive the potatoes through with force. The suction cup feet are intended to hold it securely in place on most flat countertops, like the stainless steel workstations you find in most professional kitchens.

If you happen to have a more porous countertop like butcher block you might need to lightly wet the feet first to ensure a tight hold. It’s also worth noting that the New Star Food Service 42313 can just as easily be mounted or permanently bolted in place.

What We Preferred

The sturdy supplies and engineering are actually good. You don’t have to fret about this French fry cutter standing as much as even the toughest of potatoes. The size of the deal with additionally makes it straightforward to get a superior mechanical benefit.

It’s additionally value noting that the push block and blade meeting simply come aside. This makes the New Star Meals Service 42313 straightforward to wash. It’s particularly handy should you plan to completely mount this French fry cutter in place.

Total

If you’re searching for a heavy-duty French fry cutter that’s straightforward to make use of and keep, with the sturdy engineering to final for years, then the New Star Meals Service 42313 may simply be the most effective French fry cutter in your kitchen.

Tiger Chef Heavy Obligation Industrial Grade French Fry Cutter

Specs:

• Forged iron body and heavy-duty building
• Stainless-steel chopping blades
• A number of dies and blade assemblies included
• Suction cup ft or everlasting wall mount
• Lengthy deal with and sturdy push plate
• 100% satisfaction assure

Tiger Chef acknowledges that better versatility usually interprets into better worth with kitchen units. So, they made certain to incorporate a number of dies and blade assemblies with this commercial-grade French fry cutter. It contains ½-inch ¼-inch, 3/8-inch fry cutter, and vegetable cutter blades in addition to 6 and eight wedge blade assemblies. All are made out of stainless-steel.

In case you wished shoestring potatoes or carrot match sticks, you possibly can use the ¼-inch die. For extra commonplace French-fries you possibly can flip to the ½ or 3/8-inch fry chopping dies. You possibly can even use the 6 or 8 wedge blade assemblies to chop issues like tomatoes and zucchini for a crudité platter.

The heavy-duty, forged iron body has the sturdiness to final for years, if not many years. It additionally comes with 4 removable suction cup ft to assist maintain it in place on a counter. Although in knowledgeable kitchen you possibly can additionally completely mount it on a wall or a prep station counter.

What We Preferred

The truth that 5 totally different blade assemblies are included within the preliminary buy and backed by a 100% satisfaction assure is actually a feather in Tiger Chef’s cap. It means that you can make fresh-cut French fries any approach you need. It additionally makes it very straightforward to shortly breakdown different greens. They even embody a useful information.

Total

If you need every little thing you want for a high-quality professional-grade fry cutter for dwelling or skilled use the Tiger Chef Heavy Obligation Industrial Grade French Fry Cutter deserves to be in your radar!

Meshist Industrial Potato Cutter

Specs:

• Prolonged deal with
• Stainless-steel tube building
• Stainless-steel blades
• Two interchangeable blade assemblies
• Designed to deal with a number of vegetable sorts

The Meshist business potato cutter is arguably extra suited to a house kitchen than it’s a skilled setting. Although a business kitchen that often must breakdown greens and fresh-cut French fries, this unit may nonetheless be very a lot in play.

It has an extra-long deal with which supplies you superior mechanical leverage. The downward pressure that can also be generated helps to carry this French fry cutter in place. Nonetheless, there aren’t any technical anchor {hardware} of suction ft. You may need to put down a non-skid mat like a little bit added insurance coverage to carry it in place.

The vast majority of the physique is made out of tubular stainless-steel. It additionally comes with a pair of blade dies for chopping half-inch in addition to 3/8-inch French fries.

The benefit of entry and sharpness of the stainless-steel blades additionally makes it straightforward to course of different onerous greens like rutabaga and zucchini, in addition to softer greens like onions.

What We Preferred

The copious use of stainless-steel building offers this French fry cutter visible enchantment, in addition to an extended lifespan. The prolonged deal with additionally offers you a superior mechanical benefit. The low price ticket can also be enticing.

Total

If you’re wanting for lots of worth for the greenback, and you’re keen to improvise a little bit to safe it in place, the Meshist French fry cutter could be the only option in your dwelling kitchen.

Sale

Meshist Commercial Potato Cutter

• Prolonged deal with for superior leverage
• Twin stainless-steel blade assemblies
• Simple to make use of with different onerous and smooth greens

ROVSUN Patented Industrial French Fry Cutter with Rudder Inventory Lever

Specs:

• Vertical French fry cutter
• Crank operation for simple utility of pressure
• Steady base with suction cups
• Meals grade 304 stainless-steel building
• Three-blade sizes included

The ROVSUN Industrial French Fry Cutter incorporates a vertical design with a particular sort of “Rudder Inventory Lever.” Not solely does this patented engineering idea make it straightforward to chop by way of even the toughest potatoes, but it surely can be dialed in to softly course of softer greens like onions and a few tomatoes.

The physique is made largely from 304 meals grade or “Industrial Grade” stainless-steel. The bottom is exceptionally sturdy and in addition contains suction cup ft.

The ROVSUN Industrial French Fry Cutter comes with three totally different chopping blades. This implies you possibly can put within the ¼-inch stainless-steel blade meeting for shoestring fries or change over to the ½-inch blades to course of rutabagas and make zucchini sticks. If you need sturdy fries with out the flatness of basic “Steak Fries” you possibly can shortly set up the three/8-inch chopping blades.

What We Preferred

The rudder inventory lever allows you to apply superior pressure when it’s essential minimize by way of powerful greens. But it additionally has the finesse to softly course of softer greens like onions. The bottom was engineered to be very steady, which is critical for successfully making use of vertical pressure. The extra suction cups additionally take that stability to the subsequent stage.

Total

If you wish to spare your self the elbow grease that comes with a mechanical lever, otherwise you merely need the type of finesse it’s essential fastidiously breakdown softer greens, the ROVSUN Industrial French Fry Cutter deserves o be excessive in your record.

Tuntrol Industrial French Fry Cutter And Vegetable Dicer

Specs:

• Push deal with lever
• 4-legged base
• Rubber ft
• Protecting gloves included
• 440 stainless-steel and aluminum building
• Water washable

This French fry cutter by Tuntrol employs a vertical strain deal with that makes essentially the most out of your bodily pressure in addition to the mechanical benefit of the lever.

It’s value noting that that is an up to date mannequin. It’s made largely from aluminum alloys and 440 stainless-steel, which makes it light-weight in addition to secure to clean with water.

The Tuntrol French Fry Cutter comes with a ¼-inch and three/8-inch chopping blades. They’re each made out of very sharp stainless-steel. So far, Tuntrol features a pair of security gloves within the buy.

Simply remember that they’re meant to cut back the danger of an unintentional minimize or pinch the place you may fail to get your hand utterly out of the way in which. You possibly can nonetheless endure a big damage in case your hand stays within the chopping space whereas actively urgent.

What We Preferred

The engineering rules of the vertical lever actually provide you with lots of mechanical benefit when working with onerous greens. It additionally allows you to apply a little bit extra finesse for instances while you need to work with softer greens. With a practiced hand, you may even be capable to break down a beefsteak tomato with this French fry cutter.

Total

That you must follow a little bit additional care to securely function this French fry cutter. Not solely by way of the urgent motion of the lever but in addition with the bottom which is just rubber ft with out suction cups.

Assuming you’ve accounted for this stuff, and the countertop or work station is dry, then you possibly can course of a excessive quantity of French fries and different greens with this cutter by Tuntrol.

GOFLAME 8541971856 French Fry Cutter

Specs:

• Stainless-steel building
• 4 blade assemblies included
• Guide press deal with operation
• Sturdy base with out suction cups

The GOFLAMNE 8541971856 French Fry Cutter is made out of corrosion-resistant, food-grade 304 stainless-steel. This implies you possibly can simply wipe it down or wash it with water, with out having to fret about rust and corrosion points.

The bottom is technically meant to be mounted onto a workstation, desk, or vertical floor. Although there are accent suction cup ft accessible. Regardless, it’s essential be conscious of the way you mount it, as this French fry cutter does have a guide push deal with, which applies pressure on to the physique of the cutter.

This GOFLAME French fry cutter comes with three sq. blades which at 1/4, 1/2, and three/8-inches. Every set is straightforward to take away and safe shortly to allow you to make no matter sort of French fries you need. It additionally features a fourth blade for processing firm-flesh fruits like apples and pears.

The blades are sturdy sufficient to deal with even onerous russet potatoes and different agency greens. Although the push-lever deal with and the way in which the push plate contacts the blades, it in all probability isn’t the most effective for processing smooth greens like onions and tomatoes.

What We Preferred

The three vegetable blades and the fruit blade meeting make this GOFLAME French fry cutter very versatile. Particularly when you think about the pleasant value level. When mounted correctly, its additionally rock-solid, which helps course of fries, greens, and fruits effectively.

Total

If you’re searching for a sturdy French fry cutter with 4 versatile chopping plates embody, and you’re keen to place in a little bit additional elbow grease, then the GOFLAMNE 8541971856 French Fry Cutter could be the best choice in your kitchen.

Lekoch Stainless Metal Mandoline Slicer

Specs:

• Mandolin Slicer
• Fry and waffle fry blades
• A number of measurement settings
• ABS heavy-duty food-grade plastic body
• Stainless-steel blade
• Handguard
• Non-skid deal with and ft

Technically this can be a sort of meals slicer often called a Mandoline, which is a sort of guide meals processor designed to make fast work of mid to agency greens. They’re a good way to get uniform slices of cucumber, onions, and different salad fares. This explicit Mandoline by Lekoch could be very versatile. It has 4 adjustment settings and a wide range of attachments.

Amongst these attachments is a waffle fry cutter particularly for potatoes. You merely set it up. Go your most popular thickness of potato slice by way of it. Then flip the slice 90-degrees and run it by way of once more. The result’s the type of “Waffle-Minimize” French fry that youngsters love, and adults like to put toppings on like cheese and chopped scallions.

With considerate planning, you may also modify the blade thick sufficient to chop conventional stick-style French fries. Although it can require a number of passes and correct use of the included handguard.

Mandolines do have a little bit little bit of a popularity for being harmful. In case you don’t respect the razor-sharp stainless-steel blade otherwise you don’t use the hand guard correctly, it may certainly provide you with a minimize that would ship you on a visit to the emergency room. Although that is true of lots of sharp kitchen units.

With correct use, you possibly can create lots of fascinating meals together with stick-cut fries, waffle fries, and nearly any fruit or vegetable that wants slicing. The nonstick ft additionally assist maintain it firmly in place, so that you don’t find yourself preventing your self an excessive amount of with every cross.

What We Preferred

It’s onerous to look previous the flexibility of a well-designed Mandoline slicer just like the Lekoch. The truth that they put lots of thought into security options just like the non-skid ft and the handguard.

Total

It is a nice match for a household that enjoys issues like salads and sliced fruit, but additionally often enjoys the consolation meals really feel of home made waffle-cut French fries.

Lekoch Stainless Steel Mandoline Slicer

• Versatile mandoline with a number of attachments
• 4 top settings for stick fries and waffle French fries
• Stainless-steel blade with food-grade plastic body

Nemco Spiral Fry Potato Cutter 55050AN

Specs:

• Spiralizer for curly fries
• Aluminum building
• Guide crank
• Adjustable mounting foot

Because the title implies, “Spiralizers” are designed to make spiral cuts of potatoes, apples, and different constantly onerous starchy meals. In case you make a fast web search, chances are high one can find a staggering variety of spiralizers on the market at shockingly low costs. Most of them are plastic or strengthened with weak metallic alloys that fail shortly. Even those who handle to make it to the top of their guarantee often begin to uninteresting shortly.

Nemco designed this spiralizer to be robust sufficient to deal with the A-typical forces utilized to the system. That is thanks largely to heavy-duty forged aluminum building and considerate engineering. It additionally features a mounting foot with a knob to tighten the bolt. In case you don’t need to completely set up it in your house kitchen, you may need to think about connecting it to a picket chopping board.

To make use of a spiralizer like this, it’s essential marry the spikes or the rotating push plate to the again of a potato. That is simpler should you don’t peel the potato first. Merely wash it to get any mud or filth off and provides it a couple of minutes to dry. It’s arguably simpler with a agency, chilly potato. If it’s essential work in a big batch, it may assist to place the top of the spiral chopping blade over a big pot of heat, salted water.

What We Preferred

The heavy-duty aluminum building is the factor that units this Nemco spiralizer other than most of the low cost, plastic competitors.

Total

In case you love curly fries and hate purchaser’s regret, then the Nemco Spiral Fry Potato Cutter 55050AN deserves your robust consideration.

Consumers Information

The seemingly humble French fry has grown to develop into a beloved establishment in nations world wide. You could find them at each sort of restaurant, from quick meals drive-thru a, to greasy spoon diners, steakhouses, and even high-end gastropubs. French fries are even stocked in grocery retailer freezers in towering chilly circumstances that vacant each week.

This begs the query, are you able to rework humble potatoes into scrumptious crispy French fries from the consolation of your own home kitchen?

The reply is “Sure.” You possibly can certainly make some very tasty French fries which are crispy on the surface and fluffy on the within. You simply must deal with a few fundamental challenges first.

Proper off the bat, it’s important to get your palms on the correct potatoes. This often means russet potatoes, which have simply the correct of starch content material and construction. Although you possibly can arguably get by with Yukon gold potatoes and even Kannebecker. Purple or waxy potatoes don’t are likely to do nicely for French fries and play higher in quarters or different dishes.

After getting the starchy potato of your alternative sorted out, you possibly can then flip your consideration to the subsequent crucial a part of the equation, the French fry cutter. Now you possibly can sit down, meticulously peel every potato, after which try to chop them into a standard French fry form, however belief me, that is an pointless trigger of utmost hand cramps.

To not point out that until you may have some type of basic culinary coaching, you can be hard-pressed to chop your little potato wedges into comparatively even items.

With a top quality French fry cutter, you possibly can rework lots of potatoes right into a fundamental French fry form in only a few minutes. This additionally offers you comparatively uniform fries, which implies your whole batch of fries will get to completely golden brown across the similar time. If you’re attempting to hand-cut your French fries you’ll find yourself with some which are overdone and darkish brown, combined in with pale under-done fries and a handful which are completely golden brown.

When you think about simply how inexpensive a French fry cutter is, you possibly can spare your self the headache of attempting to kind out fries one after the other as they fry, bake, or air fry.

Now, you could be shocked to listen to that for one thing that does such a seemingly easy job, there are some fascinating engineering and materials cues to bear in mind.

The Sort And Dimension Or The Blades

Some French fry cutters stick you with one static form and might’t be adjusted. These often vary round a quarter-inch thick, which is what lots of people would think about an “Common” French fry. Although if you wish to get inventive on occasion, otherwise you simply need to have a night with some steak fries, you then may need to search for a French fry cutter with adjustable blades.

There are even some that allow you to get inventive with several types of fries. You may even be capable to use them for different greens like rutabaga, candy potatoes, and zucchini.

Die And Dimension Equipment

A number of French Fry cutter producers provide models with equipment and die. You merely take away the unique die for the quarter, three-eighths, or half-inch sticks, and safe a brand new one. This lets you get inventive with shapes in addition to opening the door for chopping sticks, fries, or wedges with different greens.

Sturdiness And Blade Power

Likelihood is you’ve observed that some potatoes are more durable than others. Relying on the place they have been grown, how they have been saved, how lengthy they have been saved, and the time of 12 months, you possibly can be coping with a really agency russet potato that takes lots of pressure or a softer one which could be a little bit tough to get it to chop straight. In instances like this, the very last thing you need is to have flimsy chopping blades that bend, twist or deform while you cross the potato by way of.

Whilst you’re at it, take a second or two to take a look at the fry cutter’s different elements, just like the body and the mounting. One thing you possibly can firmly clamp down on a countertop or lock right into a mounting bracket allows you to focus the pressure of chopping the potato on the potato itself with out essentially having to battle your self together with your different hand.

If potential, you need to prioritize a metallic body and elements over plastic. Particularly if you will be making fresh-cut French fries. Although there are some heavy-duty plastic units on the market that could be accessible at a funds value level that would seem in your radar in case you are solely going to sometimes minimize contemporary French fries.

Ease To Clear

Ideally, you need a French fry cutter with out lots of transferring components or one which comes aside simply. In an ideal world, the most effective French fry cutter would even be dishwasher secure. This additionally spares you from unintentionally injuring your self attempting to wash a pointy blade.

Mounting Methodology

Whereas a potato may look like a comparatively easy factor it may take a good quantity of pressure to simultaneous divide one right into a dozen or so fresh-cut French fries. Particularly if you end up coping with a tough potato contemporary out of chilly storage. The very last thing you need is to be pushing with one hand and resisting with the opposite hand.

There are just a few totally different ways in which a French fry chopping could be mounted. In some skilled kitchens, you will notice them anchored immediately onto partitions or different prep stations. Likelihood is you in all probability don’t want one thing this structurally sturdy hanging out in your kitchen every day.

As an alternative, a French fry cutter with some sort of suction cup ft, or a pair of sturdy screw-down clamps could be all the safety it’s essential safely breakdown a handful of potatoes into a giant batch of fries.

Incessantly Requested Questions

Q: Is There Something I Can Do To Make It Simpler To Work With Actually Onerous Russet Potatoes?

A: There are generally when a russet potato is surprisingly onerous. Not solely can this add lots of elbow grease to the equation, however with some French fry cutters, it may probably deform the blades! In a pinch, you possibly can soften a rock-hard russet by giving it a 30-seconds within the microwave to launch a few of the inside trapped steam.

Simply don’t poke holes in it with a fork such as you would a microwaved baked potato. In case you nonetheless need it a little bit softer, you possibly can wait a minute or two earlier than giving it one other 30-seconds within the microwave. In case you give it a full 60-seconds proper off the bat, because it may produce an excessive amount of steam inflicting a rupture within the potato.

Q: How Do I Hold Recent Minimize Fries From Browning When Chopping A Massive Batch?

A: Oxidation is a naturally occurring chemical course of that occurs with lots of excessive starch meals like apples and russet potatoes, which turns them irrevocably brown. Because the title implies is requires the presence of oxygen to have an effect on the floor. As soon as it does the fries will nonetheless be edible, however maybe not as visually interesting.

In case you’re chopping a big batch of contemporary French fries the simple approach round that is to chop them immediately right into a pot or heat salty water. This may forestall oxygen from interacting with the floor of the fries. The salt and heat water collectively will even assist to attract out a few of the pure starch from throughout the fries. Giving them just a few hours to soak in heat salty water earlier than they hit the fryer provides you with a greater probability of frites with a crispy exterior and a fluffy inside.

That is one thing that lots of high-end gastropubs and eating places do. It additionally allows you to put together your fries will prematurely of cooking to maintain you from getting “In The Weeds” while you cook dinner lunch of supper. You possibly can even put the saltwater-soaked fries within the fridge for as much as a day with out worrying about them breaking down.

Q: Can I Bake Recent Minimize French Fries?

A: French fries generally get a foul popularity for being fatty meals as a consequence of their affiliation with deep frying. Today oven-baked French fries and air baked French fries are more and more common as a low-oil technique of cooking potato merchandise of every kind.

To do that you first must preheat your oven or air fryer to 400 to 450 levels. As soon as it’s prepared, you possibly can take your fresh-cut French fries, and flippantly toss them with oil. In case you don’t need to get your palms greasy, you may need to strive a reloadable oil sprayer. Evo Oil Sprayer Bottle or Besmon Olive Oil Sprayer mean you can gently mist meals and pans together with your selections of heart-healthy oils like olive oil or sunflower oil.

After getting a little bit oil on the fresh-cut French fries, you possibly can then flippantly salt them. It is a essential step, because the oil will assist the salt to stick to the fries. In case you wait till after they’re baked, the salt will merely slide off and sit on the pan or plate.

Conclusion

Discovering the most effective French fry cutter for you possibly can rely on a number of elements. Proper off the bat, high quality supplies and sturdiness matter. So, prioritizing issues like forged iron, stainless-steel, or food-grade plastic will go a great distance towards ensuring that you simply see a real return in your funding.

Whilst you’re at it, you may need to additionally preserve your eye out for versatile models that include a number of chopping blades or different particular attachments. Particularly if you wish to use it to course of different forms of greens.

Security and ease of use are additionally issues that must be in your radar. Take a second to consider the place you’ll most frequently use the French fry cutter. In case you’re simply going to make use of it often to make the children some French fries, then a unit with suction cup ft could be all you want.

If you will be utilizing the French fry cutter in knowledgeable kitchen or to course of potatoes and different greens frequently, you may need to search for one which has the choice to be completely mounted to a prep station.

If you need one thing a little bit extra inventive than easy stick-cut French fries, you may need to search for a specialised unit. With the proper attachments, a mandoline can be utilized to make high-quality waffle fries, whereas additionally serving to you to course of a variety of different greens.

On the opposite finish of the spectrum, a heavy-duty spiralizer could be simply the factor for a household or a popup restaurant that likes to have curly fries on the menu.

Product Packing containers: Final up to date on 2021-03-20 / Affiliate hyperlinks / Photos from Amazon Product Promoting API